For active missions where a full wader seems over-the-top, G3 Guide Pants keep you in the mix and comfortably on the move. Rock-hopping mobility makes them a mountain stream staple. And rugged Gore-Tex waterproof breathability means they outlast the elements — so you can embrace yours. Made with hands, heart and soul and individually tested for waterproofness in Bozeman, Montana, USA, of imported materials, namely world-renowned GORE-TEX fabric.
- Updated material lamination package with even more durable, breathable, and comfortable GORE-TEX 3-layer upper and 4-layer lower
- Double snap closure with TIZIP® waterproof fly zipper
- Built-in low-profile belt loops with 2 inch stretch wading belt included
- Front and back leg seams distinctive to Simms waders
- Abrasion-resistant, built-in Gravel Guards
- Anatomically engineered neoprene stockingfeet with anti-microbial finish
- Made in USA of imported materials
- *Best wader warranty in fishing: 60-Day replacement for leaks, no questions asked. 365 Days repairs on us. See the tab above for details.
FABRIC TECH: Upper: 3-layer waterproof, breathable GORE-TEX; Lower: 4-Layer waterproof, breathable GORE-TEX Pro Shell
WEIGHT: 47 oz. (1332 g) in size Medium
ITEM #: PG-13597
Men's Wading Pant Size Chart
Start by determining your waist, inseam and stockingfoot bootie size. The two columns on the left (Simms Wader Size and Inseam Type) will inform what size wader you fit in. For more information on sizing, watch our Wader Sizing Video linked in the section below.
Please note that this is our full chart of size offerings, and not every wader comes in every size.
| Simms Men's Wading Pant Size | Inseam Type | Waist |
Inseam (Crotch to floor) |
Stockingfoot Size (Shoe Size) |
|
S 7 - 8 |
Regular |
28”- 32” |
31" - 32" |
7 - 8 |
|
S King 7 - 8 |
Regular |
30” - 34” |
31" - 32" |
7 - 8 |
|
M 9 - 11 |
Regular |
32” - 36” |
33" - 34" |
9 - 11 |
|
M 9 - 11 |
Short |
32” - 36” |
29” - 30” |
9 - 11 |
|
M King 9 - 11 |
Regular |
34” - 38” |
33" - 34" |
9 - 11 |
|
M 9 - 11 |
Long |
32" - 36" |
35" - 36" |
9 - 11 |
|
L 9 -11 |
Regular |
36" - 40" |
33" - 34" |
9 - 11 |
|
L 9 - 11 |
Short |
36" - 40" |
31" - 32" |
9 - 11 |
|
L King 9 - 11 |
Regular |
38” - 42” |
33" - 34" |
9 - 11 |
|
L 9 - 11 |
Long |
36" - 40" |
35" - 36" |
9 - 11 |
|
XL 12 - 13 |
Regular |
40” - 44” |
35" - 36" |
12 - 13 |
|
XL King 12 - 13 |
Regular |
42" - 46" |
35" - 36" |
12 - 13 |
|
XL 12 - 13 |
Long |
40" - 44" |
37” - 38” |
12 - 13 |
|
XXL 12 - 13 |
Regular |
44" - 48" |
35" - 36" |
12 - 13 |
Wader Care
- SIMMS waders are all built from a durable breathable fabric. Whether that is GORE-TEX® or Toray®, the care that should be taken is the same.
- Waders should be dried after each use, both inside and out. Simms understands that certain situations do not allow for time to fully dry between uses. It is the expectation that this circumstance will contribute to a potential shorter lifespan.
- Breathable fabrics are porous in nature and can collect dirt, oils from the skin and other environmental substances. Regular cleaning of waders is a key contributor to their lifespan.
- Depending on the amount of days used, annual, bi-annual or tri-annual washing is recommended.
- Exposure to salt water or salt air requires special care: The waders must be rinsed thoroughly with fresh water and dried after each use.
If your SIMMS product fails due to a defect in workmanship or materials, SIMMS will repair or replace your gear and get you back on the water as soon as possible. If your SIMMS product fails due to excessive wear, accidents involving barbed wire or campfires, or the natural breakdown of materials over extended time, SIMMS will make every effort to repair your gear for a reasonable fee.
WADER WARRANTY DETAILS
-
60-DAYS – WADERS - REPLACEMENT FOR LEAKS, NO QUESTIONS ASKED
-
365-DAYS – WADERS – REPAIRS ON US
-
If purchased directly from SIMMS, visit our Repairs page to begin your request (located via the "Help" menu in the footer menu).
-
You are responsible for charges related to shipping the wader to SIMMS. SIMMS will cover return shipping of the wader back to you.
-
If purchased from an authorized SIMMS dealer in North America, you may return your waders to that dealer for repair. You must provide the original sales receipt or proof of purchase to the authorized dealer.
-
If purchased outside the US and Canada, please consult the dealer where your product was purchased to confirm international warranty terms in your territory.
WADER REPAIRS BEYOND THE FIRST YEAR - $60
- If your wader is in need of repair after your first year, Simms charges a flat fee of $60 for evaluation, repair, testing of repairs and return shipping back to you. To initiate a repair, please contact the authorized Simms Dealer where your wader was purchased, or you may use the Simms Online Repair Center and return the waders to Simms.
- Turnaround time for any repair or warranty claim is roughly 3 weeks, not including transit time to and from Simms. Turnaround time may vary depending on seasonal volume.
- Wader repair in Bozeman, Montana, is available only to customers based in U.S. and Canada
